Small metal shop with machined aluminum parts on a steel bench and an open door looking out to snowy mountains

Metal shop for businesses

Metal parts from first prototype to repeat runs in Utah

Mountain Metal Fab LLC cuts, machines, bends and finishes steel, aluminum and stainless for manufacturers, equipment builders and product teams across Weber County and nearby Davis County communities.

From one piece to repeat runs

Every part climbs the same route. Pick a camp to see what we need from you there and what changes in the shop.

A mountain route with four camps, from a one-off prototype at the bottom to repeat runs at the summit Your idea Camp 1Camp 2Camp 3Camp 4

Camp 1 of 4 One piece, sometimes two or three versions

A single piece to hold in your hand

The first camp is one part made to see whether the idea works. Speed of learning matters more than speed of making, so we keep the setup simple and talk often.

What we need from you

  • A sketch, a drawing or a model file, whichever exists
  • What the part has to do and what it touches
  • The material you have in mind, or the question of which one
  • Anything you already know will change

What changes in the shop

  • Parts are laid out and cut one at a time
  • Holes, bends and pockets are set up by hand at the machine
  • We call with questions instead of guessing
  • Changes between versions are quick to make, so we expect them
Plan a prototype

Three stages, one shop

The shop is organised like the route a part takes. It starts as a prototype, moves into production when the design settles and always ends at the finishing bench. You can join the route at any point: some customers arrive with a napkin sketch, others with a part they have ordered many times before.

What to send for a quote

The more we know about the part, the fewer questions we ask before quoting. None of these is required to start a conversation, and a phone call is fine too.

After you send the form, email drawings and photos to [email protected].

Bent sheet metal bracket and a machined block on a bench beside a pencil sketch and a caliper
  • A drawing, sketch or model file

    Whatever exists. A clear sketch with the key dimensions is enough for a first conversation.

  • Material and thickness, if known

    Steel, aluminum or stainless. If you are unsure, tell us what the part does and we will suggest one.

  • Quantity and how it may grow

    One piece now and fifty later is useful to know. It changes how we set the job up.

  • Where the part fits

    A photo of the mating parts or the space it goes into saves a round of questions.

  • Finish and edges

    Painted later, left bare, brushed or handled every day. The edge work follows from that.

  • Your timeline

    The date you are working toward, so we can tell you honestly what the shop can do.

Three metals we work every day

Most parts that come through the shop are mild steel, aluminum or stainless. Each one behaves differently on the saw, the brake and the mill, and we plan the job around that.

MetalParts we often makeHow it behaves
Mild steelBrackets, base plates, gussets, covers that will be paintedForgiving to cut, bend and drill. The usual choice for parts that are coated later.
AluminumLight covers, panels, machined blocks, extrusion partsLight and clean to machine. Marks easily, so faces are protected between steps.
Stainless steelParts that stay bare, see moisture or need to be cleaned oftenSlower to cut and machine, keeps a sharp burr. Edges are always finished by hand.
Rows of identical machined aluminum parts laid out on a steel table beside a fixture plate

Who sends us work

Our customers are businesses of every size, from a one-person product company to a manufacturer with a production line. What they share is a part that needs to be made well, in the right quantity.

  • Manufacturers

    Brackets, plates and covers for the products you build, from the first sample to the regular order.

  • Equipment builders

    Mounting parts, guards, access panels and machined blocks for the machines you assemble.

  • Product teams and startups

    Prototypes and early batches while the design is still moving.

  • Design and engineering studios

    Physical versions of client concepts, made from your drawings.

  • Distributors

    Parts made to your drawing and packed under your part number.

  • Maintenance teams

    Replacement brackets and plates made from a worn sample, in the shop.

Questions before the first order

Do you work with individuals or only businesses?

Our work is for businesses: manufacturers, equipment builders, product teams, studios and distributors. A one-person company with a product idea is very welcome.

Can I visit the shop?

Yes, by appointment during business hours. Bringing a sample part or a mockup is often the quickest way to start.

How do I get a quote?

Send the form or email us your drawing, sketch or photos with the quantity and material. We review it and send a written quote before work starts.

Where do finished parts go?

Finished parts are packed and ready for pickup at the shop in Weber County. We can talk through delivery arrangements for larger orders when you request a quote.

Bring us the part you are working on

A drawing, a sketch or a sample is enough to start. We read it, ask what we need to know and send a written quote before any metal is cut.